PUBLICATIONS

1. Mason J.J., Lambros J. and Rosakis A.J. (1992), “The use of a coherent gradient sensor in dynamic mixed- mode fracture mechanics experiments”, Journal of the Mechanics and Physics of Solids, Vol. 40, No. 3, pp. 641- 661.

2. Liu C., Lambros J. and Rosakis A.J. (1993), “Highly transient crack growth in a bimaterial interface : Higher order asymptotic analysis and optical experiments”, Journal of the Mechanics and Physics of Solids, Vol. 41, No. 12, pp. 1887-1954.

3. Lambros J. and Rosakis A.J. (1995), “Dynamic decohesion of bimaterials : Experimental observations and failure criteria”, International Journal of Solids and Structures , Vol. 32, No. 17/18, pp. 2677-2702.

4. Lambros J. and Rosakis A.J. (1995), “Shear dominated transonic crack growth in bimaterials-Part I: Experimental observations”, Journal of the Mechanics and Physics of Solids, Vol. 43, No. 2, pp. 169-188.

5. Lambros J. and Rosakis A.J. (1995), “Development of a dynamic decohesion criterion for subsonic fracture of the interface between two dissimilar materials”, Proceedings of the Royal Society of London, Series A, Vol. 451, pp. 711-736.

6. Lee Y. J., Lambros J. and Rosakis A.J. (1996), “Analysis of coherent gradient sensing (CGS) by Fourier optics”, Optics and Lasers in Engineering, Vol. 25, No. 1, pp. 25-53.

7. Lambros J. and Rosakis A.J. (1997), “Dynamic crack initiation and growth in thick unidirectional graphite/epoxy plates”, Composites Science and Technology, Vol. 57, No. 1, pp. 55-65.

8. Lambros J. and Rosakis A.J. (1997), “An experimental study of the dynamic delamination of thick fiber reinforced polymeric matrix composite laminates”, Experimental Mechanics, Vol. 37, No. 3, pp. 360-366.

9. Singh R., Lambros J., Shukla A. and Rosakis A.J. (1997), “Two optical techniques applied to the investigation of the mechanics of intersonic crack propagation along a bimaterial interface”, Proceedings of the Royal Society of London, Series A, Vol. 453, pp. 2649-2667.

10. Li Z. and Lambros J. (1999), “Determination of the dynamic response of polymeric matrix composites using the Split Hopkinson Pressure Bar”, Composites Science and Technology, Vol. 59, No. 7, pp. 1097-1107.

11. Lambros J., Santare M. H., Li H. and Sapna G. III (1999), “A novel technique for the fabrication of laboratory scale Functionally Graded Materials”, Experimental Mechanics, Vol. 39, No. 3, pp. 183-189.

12. Lambros J., Narayanaswamy A., Santare M.H. and Anlas G. (1999), “Manufacture and testing of a model functionally graded material”, Journal of Engineering Materials and Technology, Vol. 121, No. 4, pp. 488-493.

13. Li H., Lambros J., Cheeseman B.A. and Santare M.H. (2000), “Experimental investigation of the quasi-static fracture of functionally graded materials”, International Journal of Solids and Structures, Vol. 37, No. 27, pp. 3715- 3732.

14. Prabhu S. and Lambros J. (2000), “A numerical investigation of three dimensional effects in cracked unidirectional fiber reinforced composite plates”, Journal of Composite Materials, Vol. 34, No. 2, pp. 116-134.

15. Li Z. and Lambros J. (2000), “Thermomechanical dynamic behavior of fiber reinforced composites”, Composites A, Vol. 31, pp. 537-547.

16. Prabhu S. and Lambros J. (2000), “Effect of mode mixity on K-dominance and three dimensionality in cracked plates”, International Journal of Fracture, Vol. 104, No. 1, pp. 51-69.

17. Anlas G., Santare M.H. and J. Lambros (2000), “Numerical calculation of stress intensity factors in functionally graded materials”, International Journal of Fracture, Vol. 104, No. 2, pp. 131-143.

18. Santare M.H. and Lambros J. (2000), “Use of a graded finite element to model the behavior of nonhomogeneous materials”, Journal of Applied Mechanics, Vol. 67, No. 4, pp. 819-822.

19. Prabhu S. and Lambros J. (2000), “A Combination Optical Method of Lateral Shearing Interferometer and Caustics”, Experimental Mechanics, Vol. 40, No. 4, pp. 376-383.

20. Li Z. and Lambros J. (2001), “Strain rate effects on the Thermomechanical Behavior of Polymers”, International Journal of Solids and Structures, Vol. 38, No. 20, pp. 3549-3562.

21. Bjerke T., Li Z. and Lambros J. (2002), “Role of plasticity in heat generation during high rate deformation and fracture of Polycarbonate”, International Journal of Plasticity, Vol. 18, No. 4, pp. 549-567.

22. Bjerke T. and Lambros J. (2002), “Heating during shearing and opening dominated dynamic fracture of polymers”, Experimental Mechanics, Vol. 42, No. 1, pp. 107-114.

23. Abanto-Bueno J. and Lambros J. (2002), “Experimental evaluation of fracture parameters in Functionally Graded Materials using a Digital Image Correlation technique”, Engineering Fracture Mechanics, Vol. 69, pp. 1695-1711.

24. Kompella M. and Lambros J. (2002), “Micromechanical characterization of cellulose fibers”, Polymer Testing, Vol. 21, pp. 523-530.

25. Wang Z., Lambros J. and Lobo R.F. (2002), “Micromechanical compressive response of a zeolite single crystal”, Journal of Materials Science, Vol. 37, No. 12, pp. 2491-2499.

26. Anlas G., Lambros J. and Santare M.H. (2002), “Dominance of asymptotic crack tip fields in elastic functionally graded materials”, International Journal of Fracture, Vol. 115, pp. 193-204.

27. Li Z., Bi X., Lambros J. and Geubelle P.H. (2002), “Dynamic fiber debonding and frictional push-out in model composite systems: experimental observations”, Experimental Mechanics, Vol. 42, No. 4, pp. 417-425.

28. Bi X., Li Z., Geubelle P.H. and Lambros J. (2002), “Dynamic fiber debonding and frictional push-out in model composite systems: numerical simulations”, Mechanics of Materials, Vol. 34, No. 7, pp. 433-446.

29. Prabhu S. and Lambros J. (2002), “Mixed mode asymptotic crack tip fields in orthotropic materials: Derivation and range of dominance”, International Journal of Fracture, Vol. 118, No. 4, pp. 339-361.

30. Wang Z., Lobo R. F. and Lambros J. (2003), “The mechanical properties siliceous ZSM-5 (MFI) crystals”, Microporous and Mesoporous Materials, Vol. 57, pp. 1-7.

31. Bjerke T. and Lambros J. (2003), “Theoretical development and experimental validation of a thermally dissipative cohesive zone model for dynamic fracture of amorphous polymers”, Journal of the Mechanics and Physics of Solids, Vol. 51, pp. 1147-1170.

32. Kimberley J. and Lambros J. (2004), “Dynamic crack kinking from a PMMA/Homalite interface”, Experimental Mechanics, Vol. 44, No. 2, pp. 158-166.

33. Abanto-Bueno J. and Lambros J. (2004), “Mechanical and fracture behavior of an artificially UV-irradiated polyethylene carbon monoxide copolymer”, Journal of Applied Polymer Science, Vol. 92, pp. 139-148.

34. Abanto-Bueno J. and Lambros J. (2005), “Experimental Determination of Cohesive Failure Properties of a Photodegradable Copolymer”, Experimental Mechanics, Vol. 45, No. 2, pp. 144-152.

35. Kandula S.S.V., Abanto-Bueno J., Geubelle P.H. and Lambros J. (2005), “Cohesive modeling of dynamic fracture in functionally graded materials”, International Journal of Fracture, Vol. 132, No. 3, pp. 275-296.

36. Kubair D., Geubelle P.H. and Lambros J. (2005), “Asymptotic analysis of a mode 3 stationary crack in a ductile functionally graded material”, Journal of Applied Mechanics, Vol. 72, No. 4, pp. 461-467.

37. Abanto-Bueno J. and Lambros J. (2006), “Parameters controlling fracture resistance in functionally gradedmaterials under mode I loading”, International Journal of Solids and Structures, Vol. 43, No. 13, pp 3920-3939.

38. Kandula S.S.V., Abanto-Bueno J., Geubelle P.H. and Lambros J. (2006), “Cohesive modeling of quasi-staticfracture in functionally graded materials”, Journal of Applied Mechanics, Vol. 73, No. 5, pp. 783-791.

39. Abanto-Bueno J. and Lambros J. (2006), “An experimental study of mixed mode crack initiation and growth in functionally graded materials”, Experimental Mechanics, Vol. 46, No. 2, pp. 179-196.

40. Berfield T.A., Patel J.K., Shimmin R.G., Braun P.V., Sottos N.R. and Lambros J. (2006), “Fluorescent Image Correlation for Nanoscale Deformation Measurements”, Small, Vol. 2, No. 5, pp. 631–635.

41. Berfield T.A., Patel J.K., Shimmin R.G., Braun P.V., Lambros J. and Sottos N.R. (2007), “Multiscale deformation measurement via digital image correlation”, Experimental Mechanics (special issue on Nanotechnology), Vol. 47, pp. 51–56.

42. Padilla H., Smith C., Lambros J., Beaudoin A. and Robertson I. (2007), “Effects of deformation twinning on energy dissipation in high rate deformed zirconium”, Metallurgical and Materials Transactions A, Vol. 38, No. 12, pp. 2916-2927.

43. Kimberley J., Lambros J. and Chasiotis I. (2008), “Failure of Microelectromechanical Systems subjected to impulse loads”, International Journal of Solids and Structures, Vol. 45, No. 2, pp. 497-512.

44. Oral A., Lambros J. and Anlas G. (2008), “Crack Initiation in Functionally Graded Materials under Mixed Mode Loading: Experiments and Simulations”, Journal of Applied Mechanics, Vol. 75, No. 5, pp. 051110-8.

45. Efstathiou C., Sehitoglu H., Carroll J., Lambros J. and Maier H.J. (2008), “Full-Field Strain Evolution during Intermartensitic Transformations in Single Crystal NiFeGa”, Acta Materialia, Vol. 56, pp. 3791-3799.

46. Kimberley J., Lambros J., Chasiotis I., J. Pulskamp, R. Polcawich, M. Dubey (2009), “A hybrid experimental/numerical investigation of the response of multilayered MEMS devices to dynamic loading”, Experimental Mechanics, DOI: 10.1007/s11340-009-9259-0.

47. Kimberley J., Cooney R.S., Lambros J., Chasiotis I. and Barker N.S. (2009), “Failure of Au RF-MEMS Switches Subjected to Dynamic Loading”, Sensors and Actuators A: Physical, Vol. 154, No. 1, pp. 140–148.

48. Carroll J., Efstathiou C., Lambros J., Sehitoglu H., Hauber B., Spotswood S. and Chona R. (2009), “Investigation of Fatigue Crack Closure Using Multiscale Image Correlation Experiments”, Engineering Fracture Mechanics, Vo. 76, No. 15, pp: 2384-2398, DOI: 10.1016/j.engfracmech.2009.08.002.

49. Jonnalagadda K.N., Chasiotis I., Yagnamurthy S., Lambros J., Pulskamp J., Polcawich R., Dubey M. (2010), “Experimental Investigation of Strain Rate Dependence in Nanocrystalline Pt Films”, Experimental Mechanics, Special issue on Nanotechnology, DOI 10.1007/s11340-008-9212-7 (2012 SEM Hetényi Award winner).

50. Efstathiou C., Sehitoglu H. and Lambros J. (2010), “Multiscale Strain Measurements of Plastically Deforming Polycrystalline Titanium: Role of Deformation Heterogeneities”, International Journal of Plasticity, Vol. 26, pp. 93– 106.

51. Krehbiel, J., Lambros, J., Viator, J. and Sottos, N.R. (2010), “Digital image correlation for improved detection of basal cell carcinoma”, Experimental Mechanics, Vol. 50, No. 6, pp. 813-824, DOI: 10.1007/s11340-009-9324-8, 2010.

52. Kimberley J., Lambros J., Chasiotis I., Pulskamp J., Polcawich R. and Dubey M. (2010), “Mechanics of energy transfer and failure of ductile microscale beams subjected to dynamic loading”, Journal of the Mechanics and Physics of Solids, Vol. 58, pp. 1125-1138, DOI:10.1016/j.jmps.2010.04.005.

53. Carroll J., Abuzaid W., Lambros J. and Sehitoglu H. (2010), “An experimental methodology to relate local strain to microstructural texture”, Review of Scientific Instruments, Vol. 81, 083703.

54. Oral A., Lambros J. and Anlas G. (2010), “Determination of Gurson-Tvergaard-Needleman Model Parameters for Failure of a Polymeric Material”, International Journal of Damage Mechanics, DOI: 10.1177/1056789510385261.

55. Padilla H., Lambros J., Beaudoin A. and Robertson I. (2010), “Spatiotemporal thermal inhomogeneities during adiabatic compression of highly textured zirconium”, Experimental Mechanics, Vol. 51, pp. 1061–1073, DOI 10.1007/s11340-010-9425-4.

56. Gates M., Lambros J. and Heath M.T. (2011), “Towards High Performance Digital Volume Correlation”, Experimental Mechanics, Vol. 51, No. 4, pp. 491-507, (Special Issue on Advanced Imaging Techniques), 2011. DOI: 10.1007/s11340-010-9445-0

57. Gain A.L., Carroll J., Paulino G.H. and Lambros J. (2011), “A hybrid experimental/numerical technique to extract cohesive fracture properties for mode-I fracture of quasi-brittle materials”, International Journal of Fracture, Vol. 169, No. 2, pp. 113-133, DOI: 10.1007/s10704-010-9578-2, 2011.

58. Lambros J. and Patel J.K. (2011), “Microscale Digital Image Correlation Study of Irradiation Induced Ductile- To-Brittle Transition in Polyethylene”, Journal of Strain Analysis for Engineering Design, (Special issue on Micro- scale experimental mechanics), Vol. 46, No. 5, pp. 347-360.

59. Yagnamurthy S., Chasiotis I., Lambros J., Polcawich R.G., Pulskamp J.S. and Dubey M. (2011), “Mechanical and Ferroelectric Behavior of PZT-based Thin Films”, Journal of Microelectromechanical Systems, Vol. PP (online first).

60. Padilla H., Lambros J., Beaudoin A. and Robertson I. (2011), “Relating inhomogeneous deformation to local texture in zirconium through multiscale digital image correlation experiments”, in press International Journal of Solids and Structures.

61. Abuzaid W., Sangid M.D., Carroll J.D., Sehitoglu H. and Lambros J., “Slip transfer and plastic strain accumulation across grain boundaries in HastelloyX”, in press Journal of the Mechanics and Physics of Solids, 2012

62. Karanjgaokar N.J., Oh C.S., Lambros J. and Chasiotis I., “Inelastic Deformation of Nanocrystalline Au Thin Films as a Function of Temperature and Strain Rate”, in press Acta Materialia, 2012

63. Wang E., Geubelle P.H. and Lambros, “An Experimental Study of the Dynamic Elasto-Plastic Contact Behavior of Metallic Granules”, in press Journal of Applied Mechanics, 2012.

64. Carroll J.D., Abuzaid W., Lambros J. and Sehitoglu H., “High resolution digital image correlation measurements of strain accumulation in fatigue crack growth”, in press International Journal of Fatigue, 2012

Journal Publications

Book Chapters

1. Lambros J. (2010), “Dynamic Response of Materials”, in Encyclopedia of Aerospace Engineering, Wiley- Blackwell, 2010

JOHN LAMBROS RESEARCH GROUP