| 2017 |
| Doll B., Ozer H., Rivera-Perez J.J., Al-Qadi I.L. and Lambros J. (2017), “Investigation of Viscoelastic Fracture Fields in Asphalt Mixtures using Digital Image Correlation”, in press International Journal of Fracture . |
| Pal R.K., Waymel R., Geubelle P.H., and Lambros J. (2017), “Tunable wave propagation in granular crystals by altering lattice network topology”, Journal of Engineering Materials and Technology , Vol. 139, No. 1, p. 011005-1, doi: 10.1115/1.4034820. |
| 2016 |
| Gonzalez J. and Lambros J. (2016), “A parametric study on the influence of internal speckle patterning for digital volume correlation in x-ray tomography applications”, Experimental Techniques , Vol. 40, No. 5, pp. 1447–1459, doi:10.1007/s40799-016-0145-2. |
| Kingstedt O.T., Eftink B.P., Robertson I.M. and Lambros J. (2016), “Inelastic strain recovery of a dynamically deformed unidirectional Ag-Cu eutectic alloy”, Acta Materialia , Vol. 113, pp. 293–300, doi: 10.1016/j.actamat.2016.04.043. |
| Ozer H., Al-Qadi I., Lambros J., El-Khatib A., Singhvi P. and Doll B. (2016), “Development of a fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters”, Construction and Building Materials , Vol. 115, pp. 390–401, doi: 10.1016/j.conbuildmat.2016.03.144. |
| Abuzaid W., Sehitoglu H. and Lambros J. (2016), “Localization of Plastic Strain at the Microstructural level in Hastelloy X subjected to Monotonic, Fatigue, and Creep loading: The role of grain boundaries and slip transmission”, Materials at High Temperatures , Vol. 33, No. 4-5, pp. 384–400, doi: 10.1080/09603409.2016.1152421. |
| Kingstedt O.T., Eftink B.P., Robertson I.M. and Lambros J. (2016), “Anisotropic dynamic compression response of a directionally-cast silver-copper eutectic alloy”, Acta Materialia , Vol. 105, pp. 273–283, doi: 10.1016/j.actamat.2015.12.024. |
| Berke R.B., Sebastian C.M., Chona R., Patterson E.A., and Lambros J. (2016), “High Temperature Vibratory Response of Hastelloy-X: Stereo-DIC Measurements and Image Decomposition Analysis”, Experimental Mechanics , Vol. 56, pp. 231–243, doi: 10.1007/s11340-015-0092-3. |
| 2015 |
| Gonzalez J., Sun K., Huang M., Lambros J., Dillon S., and Chasiotis I. (2015), “X-ray microtomography characterization of Sn particle evolution during lithiation/delithiation in lithium ion batteries”, Journal of Power Sources , Vol. 285, pp. 205-209, short communication, doi: 10.1016/j.jpowsour.2015.03.093. |
| On T., Wang E. and Lambros J. (2015), “Plastic waves in one-dimensional heterogeneous granular chains under impact loading: Single intruders and dimer chains”, International Journal of Solids and Structures , Vol. 62, pp. 81–90, doi: 10.1016/j.ijsolstr.2015.02.006. |
| Kingstedt O.T. and Lambros J. (2015), “ Ultra-high speed imaging of laser-induced spallation”, Experimental Mechanics , Vol. 55, pp. 587–598, doi: 10.1007/s11340-014-9973-0. ( 2017 SEM Hetényi Award winner ). |
| Swaminathan B., Lambros J., Abuzaid W. and Sehitoglu H. (2015), “Investigation of Portevin-Le Chatelier effect at elevated temperatures in Hastelloy X using digital image correlation”, International Journal of Plasticity , Vol. 64, pp. 177–192, doi: 10.1016/j.jpowsour.2014.07.001. |
| Gates M., Heath M.T. and Lambros J. (2015), “High Performance Hybrid CPU and GPU Parallel Algorithm for Digital Volume Correlation”, International Journal of High Performance Computing Applications , Vol. 29, No. 1, pp. 92-106, doi: 10.1177/1094342013518807. |
| Gates M., Gonzalez J., Lambros J. and Heath M.T. (2015), “Subset Refinement for Digital Volume Correlation: Numerical and Experimental Applications”, Experimental Mechanics , (2015) Vol. 55, pp. 245–259, doi: 10.1007/s11340-014-9881-3. |
| 2014 |
| Pal R.J., Morton J., Wang E., Lambros J. and Geubelle P.H. (2014), “ Impact response of elasto-plastic granular chains containing an intruder particle”, Journal of Applied Mechanics , Vol. 82, p. 011002-1, doi: 10.1115/1.4028959. |
| Eftink B.P., Mara N.A., Kingstedt O.T., Safarik D., Lambros J. and Robertson I.M. (2014), “Anomalous deformation twinning in coarse-grained Cu in Ag60Cu40 composites under high strain-rate compressive loading”, Materials Science and Engineering A , Vol. 618, pp. 254–261, doi:10.1016/j.msea.2014.08.082. |
| Sellappan P., Espinoza Santos C.J., Wang E., On T., Lambros J. and Kriven W.M. (2014), “Wave propagation through alumina-porous alumina laminates”, Journal of the European Ceramic Society , Vol. 35, No. 1, pp: 197–210, doi: 10.1016/j.jeurceramsoc.2014.08.013. |
| Sellappan P., Espinoza Santos C.J., Wang E., On T., Lambros J. and Kriven W.M. (2014), “Wave propagation through alumina-porous alumina laminates”, Journal of the European Ceramic Society , Vol. 35, No. 1, pp: 197–210, doi: 10.1016/j.jeurceramsoc.2014.08.013. |
| Gonzalez J., Sun K., Huang M., Lambros J., Dillon S., and Chasiotis I. (2014), “Three dimensional studies of particle failure in Silicon based composite electrodes for Lithium ion batteries”, Journal of Power Sources , Vol. 269 pp. 334-343, doi: 10.1016/j.jpowsour.2014.07.001. |
| Berke R.B. and Lambros J. (2014), “Ultraviolet digital image correlation (UV-DIC) for high temperature applications”, Review of Scientific Instruments , Vol. 85, pp. 045121-9. |
| Casperson M.C., Carroll J.D., Lambros J., Sehitoglu H., Dodds R.H. Jr. (2014), “Investigation of Thermal Effects on Fatigue Crack Closure using Multiscale Digital Image Correlation Experiments”, International Journal of Fatigue , Vol. 61, pp. 10-20. |
| Kingstedt O.T., Eftink B., Lambros J. and Robertson I.M. (2014), “Quasi-static and dynamic compressive deformation of a bulk nanolayered Ag-Cu eutectic alloy: Macroscopic response and dominant deformation mechanisms”, Materials Science and Engineering A ., Vol. 595, pp: 54–63, doi: 10.1016/j.msea.2013.11.061. |
| Swaminathan B., Lambros J. and Sehitoglu H. (2014), “Digital image correlation study of mechanical response of nickel superalloy Hastelloy X under thermal and mechanical cycling: Uniaxial and biaxial stress states”, Journal of Strain Analysis for Engineering Design , Vol. 49, No. 4, pp. 233 – 243. |
| Pollak R.T. and Lambros J. (2014), “Editorial: Special issue on strain measurement in extreme environments”, Journal of Strain Analysis for Engineering Design , Vol. 49, No. 4, pp. 202 – 203, doi: 10.1177/0309324714522166 |
| On T., LaVigne P.A. and Lambros J. (2014), “Development of plastic nonlinear waves in one-dimensional ductile granular chains under impact loading”, Mechanics of Materials , Vol. 68, pp. 29–37, doi: 10.1016/j.mechmat.2013.06.013. |
| 2013 |
| Abuzaid W., Oral A., Sehitoglu H., Lambros J. and Maier H.J. (2013), “Fatigue Crack Initiation in Hastelloy X – The Role of Boundaries”, Fatigue and Fracture of Engineering Materials and Structures , Vol. 36, No. 8, pp. 809–826. |
| Carroll J.D., Abuzaid W., Lambros J. and Sehitoglu H. (2013), “On the interactions between strain accumulation, microstructure, and fatigue crack behavior”, International Journal of Fracture , Vol. 180, pp. 223-241. |
| Wang E., On T. and Lambros J. (2013), “An Experimental Study of the Dynamic Elasto-Plastic Contact Behavior of Dimer Metallic Granules”, Experimental Mechanics , Vol. 53, No. 5, pp. 883-892, doi: 10.1007/s11340-012-9696-z. |
| Abuzaid W., Sehitoglu H. and Lambros J. (2013), “Plastic Strain Localization and Fatigue Micro-Crack Formation in Hastelloy X”, Materials Science and Engineering: A , Vol. 561, pp. 507–519. |
| Carroll J.D., Abuzaid W., Lambros J. and Sehitoglu H. (2013), “High resolution digital image correlation measurements of strain accumulation in fatigue crack growth”, International Journal of Fatigue , Special Issue on Fatigue and Microstructure, Vol. 57, pp. 140–150 (In the top 20 most downloaded papers of IJF since 2013-2016). |
| Wang E., Geubelle P.H. and Lambros J. (2013), “An Experimental Study of the Dynamic Elasto-Plastic Contact Behavior of Metallic Granules”, Journal of Applied Mechanics , Vol. 80, No. 2, p. 021009. |
| Gonzalez J. and Lambros J. (2013), “Crack Path Selection in Microstructurally Tailored Inhomogeneous Polymers”, Experimental Mechanics , Vol. 53, pp. 619-634, doi: 10.1007/s11340-012-9668-3. |
| 2012 |
| Awasthi A.P., Smith K.J., Geubelle P.H. and Lambros J. (2012), “Propagation of solitary waves in 2D granular media: a numerical study”, Mechanics of Materials , Vol. 54, pp. 100–112. |
| Karanjgaokar N., Oh C.-S., Lambros J. and Chasiotis I. (2012), “Inelastic deformation of nanocrystalline Au thin films as a function of temperature and strain rate”, Acta Materialia , Vol. 60, pp. 5352–5361. |
| Abuzaid W., Sangid M.D., Carroll J., Sehitoglu H. and Lambros J. (2012), “Slip transfer and plastic strain accumulation across grain boundaries in Hastelloy X”, Journal of the Mechanics and Physics of Solids , Vol. 60, No. 6, pp. 1201-1220. |
| Padilla H., Lambros J., Beaudoin A. and Robertson I. (2012), “Relating inhomogeneous deformation to local texture in zirconium through multiscale digital image correlation experiments”, International Journal of Solids and Structures , Vol. 49, No. 1, pp. 18–31. |
| Oral A., Lambros J. and Anlas G. (2012), “Determination of Gurson-Tvergaard-Needleman model parameters for failure of a polymeric material”, International Journal of Damage Mechanics , Vol. 21, DOI: 10.1177/1056789510385261. |
| 2011 |
| Yagnamurthy S., Chasiotis I., Lambros J., Polcawich R.G., Pulskamp J.S. and Dubey M. (2011), “Mechanical and ferroelectric behavior of PZT-based thin films”, Journal of Microelectromechanical Systems , Vol. 20, No. 6, pp. 1250–1258. |
| Lambros J. and Patel J.K. (2011), “Microscale digital image correlation study of irradiation induced ductile-to-brittle transition in polyethylene”, Journal of Strain Analysis for Engineering Design , (Special issue on Micro-scale experimental mechanics), Vol. 46, No. 5, pp. 347–360. |
| Gain A.L., Carroll J., Paulino G.H. and Lambros J. (2011), “A hybrid experimental/numerical technique to extract cohesive fracture properties for mode-I fracture of quasi-brittle materials”, International Journal of Fracture , Vol. 169, No. 2, pp. 113–133, DOI: 10.1007/s10704-010-9578-2, 2011. |
| Gates M., Lambros J. and Heath M.T. (2011), “Towards high performance digital volume correlation”, Experimental Mechanics , Vol. 51, No. 4, pp. 491–507, (Special Issue on Advanced Imaging Techniques), 2011. DOI: 10.1007/s11340-010-9445-0 |
| 2010 |
| Lambros J. (2010), “Dynamic Response of Materials”, in Encyclopedia of Aerospace Engineering, Wiley-Blackwell, 2010 |
| Padilla H., Lambros J., Beaudoin A. and Robertson I. (2010), “Spatiotemporal thermal inhomogeneities during adiabatic compression of highly textured zirconium”, Experimental Mechanics , Vol. 51, pp. 1061–1073, DOI 10.1007/s11340-010-9425-4. |
| Carroll J., Abuzaid W., Lambros J. and Sehitoglu H. (2010), “An experimental methodology to relate local strain to microstructural texture”, Review of Scientific Instruments , Vol. 81, 083703. |
| Kimberley J., Lambros J., Chasiotis I., Pulskamp J., Polcawich R. and Dubey M. (2010), “Mechanics of energy transfer and failure of ductile microscale beams subjected to dynamic loading”, Journal of the Mechanics and Physics of Solids , Vol. 58, pp. 1125–1138, DOI:10.1016/j.jmps.2010.04.005. |
| Krehbiel, J., Lambros, J., Viator, J. and Sottos, N.R. (2010), “Digital image correlation for improved detection of basal cell carcinoma”, Experimental Mechanics , Vol. 50, No. 6, pp. 813–824, DOI: 10.1007/s11340-009-9324-8, 2010. |
| Efstathiou C., Sehitoglu H. and Lambros J. (2010), “Multiscale strain measurements of plastically deforming polycrystalline titanium: role of deformation heterogeneities”, International Journal of Plasticity , Vol. 26, pp. 93–106. (In the top 25 most cited papers of IJP 2010-2015). |
| Jonnalagadda K.N., Chasiotis I., Yagnamurthy S., Lambros J., Pulskamp J., Polcawich R., Dubey M. (2010), “Experimental investigation of strain rate dependence in nanocrystalline Pt films”, Experimental Mechanics , Special issue on Nanotechnology, DOI 10.1007/s11340-008-9212-7 ( 2012 SEM Hetényi Award winner ). |
| 2009 |
| Carroll J., Efstathiou C., Lambros J., Sehitoglu H., Hauber B., Spotswood S. and Chona R. (2009), “Investigation of fatigue crack closure using multiscale image correlation experiments”, Engineering Fracture Mechanics , Vo. 76, No. 15, pp: 2384–2398, DOI: 10.1016/j.engfracmech.2009.08.002. |
| Kimberley J., Cooney R.S., Lambros J., Chasiotis I. and Barker N.S. (2009), “Failure of Au RF-MEMS switches subjected to dynamic loading”, Sensors and Actuators A: Physical , Vol. 154, No. 1, pp. 140–148. |
| Kimberley J., Lambros J., Chasiotis I., J. Pulskamp, R. Polcawich, M. Dubey (2009), “A hybrid experimental/numerical investigation of the response of multilayered MEMS devices to dynamic loading”, Experimental Mechanics , DOI: 10.1007/s11340-009-9259-0. |
| 2008 |
| Efstathiou C., Sehitoglu H., Carroll J., Lambros J. and Maier H.J. (2008), “Full-field strain evolution during intermartensitic transformations in single crystal NiFeGa”, Acta Materialia , Vol. 56, pp. 3791–3799. |
| Oral A., Lambros J. and Anlas G. (2008), “Crack initiation in functionally graded materials under mixed mode loading: experiments and simulations”, Journal of Applied Mechanics , Vol. 75, No. 5, pp. 051110–8. |
| Kimberley J., Lambros J. and Chasiotis I. (2008), “Failure of Microelectromechanical Systems subjected to impulse loads”, International Journal of Solids and Structures , Vol. 45, No. 2, pp. 497–512, doi: 10.1016/j.ijsolstr.2007.08.004. |
| 2007 |
| Padilla H., Smith C., Lambros J., Beaudoin A. and Robertson I. (2007), “Effects of deformation twinning on energy dissipation in high rate deformed zirconium”, Metallurgical and Materials Transactions A, Vol. 38, No. 12, pp. 2916–2927. |
| Berfield T.A., Patel J.K., Shimmin R.G., Braun P.V., Lambros J. and Sottos N.R. (2007), “Multiscale deformation measurement via digital image correlation”, Experimental Mechanics (special issue on Nanotechnology), Vol. 47, pp. 51–56. |
| 2006 |
| Berfield T.A., Patel J.K., Shimmin R.G., Braun P.V., Sottos N.R. and Lambros J. (2006), “Fluorescent image correlation for nanoscale deformation measurements”, Small , Vol. 2, No. 5, pp. 631–635. |
| Abanto-Bueno J. and Lambros J. (2006), “An experimental study of mixed mode crack initiation and growth in functionally graded materials”, Experimental Mechanics , Vol. 46, No. 2, pp. 179–196. |
| Kandula S.S.V., Abanto-Bueno J., Geubelle P.H. and Lambros J. (2006), “Cohesive modeling of quasi-static fracture in functionally graded materials”, Journal of Applied Mechanics , Vol. 73, No. 5, pp. 783–791. |
| Abanto-Bueno J. and Lambros J. (2006), “Parameters controlling fracture resistance in functionally graded materials under mode I loading”, International Journal of Solids and Structures , Vol. 43, No. 13, pp 3920 – 3939 . |
| 2005 |
| Kubair D., Geubelle P.H. and Lambros J. (2005), “Asymptotic analysis of a mode 3 stationary crack in a ductile functionally graded material”, Journal of Applied Mechanics , Vol. 72, No. 4, pp. 461–467. |
| Kubair D., Geubelle P.H. and Lambros J. (2005), “Asymptotic analysis of a mode 3 stationary crack in a ductile functionally graded material”, Journal of Applied Mechanics , Vol. 72, No. 4, pp. 461–467. |
| Abanto-Bueno J. and Lambros J. (2005), “Experimental determination of cohesive failure properties of a photodegradable copolymer”, Experimental Mechanics , Vol. 45, No. 2, pp. 144–152. |
| 2004 |
| Abanto-Bueno J. and Lambros J. (2004), “Mechanical and fracture behavior of an artificially UV-irradiated polyethylene carbon monoxide copolymer”, Journal of Applied Polymer Science , Vol. 92, pp. 139–148. |
| Kimberley J. and Lambros J. (2004), “Dynamic crack kinking from a PMMA/Homalite interface”, Experimental Mechanics , Vol. 44, No. 2, pp. 158–166. |
| 2003 |
| Bjerke T. and Lambros J. (2003), “Theoretical development and experimental validation of a thermally dissipative cohesive zone model for dynamic fracture of amorphous polymers”, Journal of the Mechanics and Physics of Solids , Vol. 51, pp. 1147–1170. |
| Wang Z., Lobo R. F. and Lambros J. (2003), “The mechanical properties siliceous ZSM-5 (MFI) crystals”, Microporous and Mesoporous Materials , Vol. 57, pp. 1–7. |
| 2002 |
| Prabhu S. and Lambros J. (2002), “Mixed mode asymptotic crack tip fields in orthotropic materials: derivation and range of dominance”, International Journal of Fracture, Vol. 118, No. 4, pp. 339–361. |
| Bi X., Li Z., Geubelle P.H. and Lambros J. (2002), “Dynamic fiber debonding and frictional push-out in model composite systems: numerical simulations”, Mechanics of Materials , Vol. 34, No. 7, pp. 433–446. |
| Li Z., Bi X., Lambros J. and Geubelle P.H. (2002), “Dynamic fiber debonding and frictional push-out in model composite systems: experimental observations”, Experimental Mechanics, Vol. 42, No. 4, pp. 417–425. |
| Anlas G., Lambros J. and Santare M.H. (2002), “Dominance of asymptotic crack tip fields in elastic functionally graded materials”, International Journal of Fracture , Vol. 115, pp. 193–204. |
| Wang Z., Lambros J. and Lobo R.F. (2002), “Micromechanical compressive response of a zeolite single crystal”, Journal of Materials Science , Vol. 37, No. 12, pp. 2491–2499. |
| Kompella M. and Lambros J. (2002), “Micromechanical characterization of cellulose fibers”, Polymer Testing , Vol. 21, pp. 523–530. |
| Abanto-Bueno J. and Lambros J. (2002), “Investigation of crack growth in functionally graded materials using digital image correlation”, Engineering Fracture Mechanics , Vol. 69, pp. 1695–1711 ( one of the most cited EFM papers between 2002-2005 ). |
| Bjerke T. and Lambros J. (2002), “Heating during shearing and opening dominated dynamic fracture of polymers”, Experimental Mechanics , Vol. 42, No. 1, pp. 107–114. |
| B jerke T., Li Z. and Lambros J. (2002), “Role of plasticity in heat generation during high rate deformation and fracture of polycarbonate”, International Journal of Plasticity , Vol. 18, No. 4, pp. 549 – 567. |
| 2001 |
| Li Z. and Lambros J. (2001), “Strain rate effects on the thermomechanical behavior of polymers”, International Journal of Solids and Structures , Vol. 38, No. 20, pp. 3549–3562. |
| 2000 |
| Prabhu S. and Lambros J. (2000), “A combination optical method of lateral shearing interferometer and caustics”, Experimental Mechanics , Vol. 40, No. 4, pp. 376–383. |
| Santare M.H. and Lambros J. (2000), “Use of a graded finite element to model the behavior of nonhomogeneous materials”, Journal of Applied Mechanics , Vol. 67, No. 4, pp. 819–822. |
| Anlas G., Santare M.H. and J. Lambros (2000), “Numerical calculation of stress intensity factors in functionally graded materials”, International Journal of Fracture , Vol. 104, No. 2, pp. 131–143. |
| Prabhu S. and Lambros J. (2000), “Effect of mode mixity on K-dominance and three dimensionality in cracked plates”, International Journal of Fracture , Vol. 104, No. 1, pp. 51–69. |
| Li Z. and Lambros J. (2000), “Thermomechanical dynamic behavior of fiber reinforced composites”, Composites A , Vol. 31, pp. 537–547. |
| Li Z. and Lambros J. (2000), “Thermomechanical dynamic behavior of fiber reinforced composites”, Composites A , Vol. 31, pp. 537–547. |
| Li H., Lambros J., Cheeseman B.A. and Santare M.H. (2000), “Experimental investigation of the quasi-static fracture of functionally graded materials”, International Journal of Solids and Structures , Vol. 37, No. 27, pp. 3715–3732. |
| 1999 |
| Lambros J., Narayanaswamy A., Santare M.H. and Anlas G. (1999), “Manufacture and testing of a model functionally graded material”, Journal of Engineering Materials and Technology , Vol. 121, No. 4, pp. 488–493. |
| Lambros J., Santare M. H., Li H. and Sapna G. III (1999), “A novel technique for the fabrication of laboratory scale Functionally Graded Materials”, Experimental Mechanics , Vol. 39, No. 3, pp. 183–189. |
| Li Z. and Lambros J. (1999), “Determination of the dynamic response of polymeric matrix composites using the Split Hopkinson Pressure Bar”, Composites Science and Technology , Vol. 59, No. 7, pp. 1097–1107. |
| 1997 |
| Singh R., Lambros J., Shukla A. and Rosakis A.J. (1997), “Two optical techniques applied to the investigation of the mechanics of intersonic crack propagation along a bimaterial interface”, Proceedings of the Royal Society of London, Series A, Vol. 453, pp. 2649–2667. |
| Lambros J. and Rosakis A.J. (1997), “An experimental study of the dynamic delamination of thick fiber reinforced polymeric matrix composite laminates”, Experimental Mechanics , Vol. 37, No. 3, pp. 360–366. |
| Lambros J. and Rosakis A.J. (1997), “Dynamic crack initiation and growth in thick unidirectional graphite/epoxy plates”, Composites Science and Technology , Vol. 57, No. 1, pp. 55–65. |
| 1996 |
| Lee Y. J., Lambros J. and Rosakis A.J. (1996), “Analysis of coherent gradient sensing (CGS) by Fourier optics”, Optics and Lasers in Engineering , Vol. 25, No. 1, pp. 25–53. |
| 1995 |
| Lambros J. and Rosakis A.J. (1995), “Development of a dynamic decohesion criterion for subsonic fracture of the interface between two dissimilar materials”, Proceedings of the Royal Society of London , Series A, Vol. 451, pp. 711–736. |
| Lambros J. and Rosakis A.J. (1995), “Shear dominated transonic crack growth in bimaterials-Part I: Experimental observations”, Journal of the Mechanics and Physics of Solids , Vol. 43, No. 2, pp. 169–188. |
| Lambros J. and Rosakis A.J. (1995), “Dynamic decohesion of bimaterials : Experimental observations and failure criteria”, International Journal of Solids and Structures , Vol. 32, No. 17/18, pp. 2677–2702. |
| 1993 |
| Liu C., Lambros J. and Rosakis A.J. (1993), “Highly transient crack growth in a bimaterial interface : Higher order asymptotic analysis and optical experiments”, Journal of the Mechanics and Physics of Solids , Vol. 41, No. 12, pp. 1887–1954. |
| 1992 |
| Mason J.J., Lambros J. and Rosakis A.J. (1992), “The use of a coherent gradient sensor in dynamic mixed-mode fracture mechanics experiments”, Journal of the Mechanics and Physics of Solids , Vol. 40, No. 3, pp. 641–661. |